This is a Castle Creations 1406-4600Kv 4-Pole Sensored Brushless Motor. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by customers, we have brought technological advancements together that will deliver unprecedented performance in Castle's new SENSORED motor Line. Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don't have a millisecond to spare. Sensored brushless motors always know the position of the rotor, which eliminates cogging during the startup condition.
Many customers have utilized Castle's industry leading software functionality that *Castle Link offers. When paired with a Castle Creations sensor supported ESC, like the MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. SMARTSENSE uses the motors sensors to start the motor to provide excellent torque and low-speed drivability. Once the motor is turning it seamlessly transitions to Castle's ULTRA- EFFICIENT sensorless mode. As the motor enters distinct phases or transitions to different load points, a different timing advance is required for optimal efficiency. Using mechanical sensors alone, you can only target one individual phase or load point, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other phases. Electronic timing in SMARTSENSE will advance timing automatically for peak performance during all phases.
Features:
4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT
Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering
QUIETSENSE Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times
HIGHER PRECISION and MORE EFFICIENT startups
OPTIMIZED design eliminates the need for mechanical timing adjustments
Sensor alignment method delivers uniform timing and torque in both directions, automatically
REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft
ROAR standard sensor port and labeled connections
High strength 180°C neodymium sintered magnets
High quality, temperature-stabilized sensors
High-purity, high-temperature copper windings
Hardened stainless steel shaft
13 AWG high strand wire with silicone insulation
Kevlar wrapped rotor
6061-T6 Billet aluminum heatsink can
High RPM NMB oversized bearings
High quality 0.2mm steel laminations
Low resistance gold plated bullet connectors
Specs:
Application: 1/10TH 2WD SCT, on-road touring, stadium truck and buggies
Bearings or Bushings: Bearings
Cells: 3S LiPo
Connector Type: 4mm Male Castle Bullet Connectors
Input Voltage: 12.6V
Motor Type: 4-Pole Sensored Brushless
Mounting Dimensions: M3 @ 25mm
Number of Poles: 4
Overall Diameter: 36mm
Overall Length: 49.5mm
RPM/Volt (Kv): 4600
Sensored: Yes
Shaft Diameter: 1/8 in (3.17mm)