The metal D-625MW is part of Hitec's D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

Speed: @4.8V .20sec/60' / @6.0V .13sec/60'

Torque: @4.8V 87oz/in / @6.0V 139oz/in

Programmable PWM Digital Amplifier

32-Bit MCU with 12-Bit ADC Circuitry

4096 Resolution

1M Cycle Long Life Potentiometer

Wide Operating Voltage (4.8 ~ 8.4 Volts DC)

Dual Ball Bearing Supported Output Shaft

25-Tooth Output Spline

 

 

Product Specifications

 

Current Draw Idle 30 mA

Product Width 0.77" (20 mm)

Current Draw Stall 2,650 mA

Bearing Dual Ball Bearing

Bushing Or Bearing Bearing

Deadband 2µs

Input Voltage 4.8V ~ 6.0V ~ 7.4V

Product Height 1.48" (38 mm)

Servo Type Digital

Application Sport Aircraft, Helicopters, Cars

Product Weight 2.11oz (57g)

Spline Count 25 - Tooth

Programmable Yes

Servo Size Category Standard

Gear Type Metal

Wire Gauge 22 AWG

Water-Resistant No

Connector Type Universal

Maximum Servo Speed 0.20 sec/60 deg 4.8V, 0.15 sec/60 deg @ 6.0V, 0.13 sec/60 deg @ 6.0V

Product Length 1.59" (40 mm)

Motor Type Brushed

Servo Operating Voltage 4.8 - 7.4V (HV)

Maximum Servo Torque 87oz/in @ 4.8V, 122oz/in @ 6.0V, 139oz/in @ 7.4V