The E-flite RV-7 1.1m Bind-N-Fly Basic Electric Airplane is modeled after Richard VanGrunsven's RV-7 design. The RV-7 is the most popular of the designs and features side-by-side seating and is known for its superior housing. E-flite has taken these stylings and flight characteristics and scaled them down into this wonderful RC plane. Offering extreme detail this officially licensed plane has scaled steps, instrument panel, pilot figure and more. For power, E-flite used a 3536-850Kv motor paired with a 45A ESC. A 3-blade propeller is used and helps provide ample thrust for extreme speed and unlimited vertical performance on 4S. This model comes with a Spektrum AR631 receiver and is ready to be paired with a Spektrum transmitter.
E-flite® RV-7 1.1m BNF® Basic and PNP
Features:
Officially licensed replica of one of the most popular and iconic "homebuilt" general aviation aircraft available in the world today
Specifically designed and equipped to offer scale-like and sport flying, high speed and high energy aerobatic capabilities
Specially tuned motor compatible with 3S and 4S batteries without the need for modifications or upgrades
Popular and affordable 3S and 4S 2200–3200mAh batteries deliver excellent performance and flight times
45-amp Spektrum™ Avian™ Smart Lite ESC provides real-time battery voltage, motor RPM and other data via compatible transmitters (sold separately)
Taildragger configuration landing gear for operation from a variety of surfaces including grass
Functional flaps for shorter takeoffs/landings and improved slow-speed handling
5-channel control with six (6) factory-installed digital servos and linkages
Factory-painted and finished in a modern and scale-like trim scheme
Lightweight yet durable composite-reinforced EPO construction
Fast and easy bolt-together assembly – no glue required
Factory-installed LED navigation and landing lights
Easy to install/remove one-piece wing
Specifications:
Completion Level: Bind-N-Fly Basic
Product Length: 35.51" (902 mm)
Wingspan: 43.31" (1100 mm)
Wing Area: 365 sq. in. (23.54 sq. dm.)
Product Weight: 3.13 lbs. (1421g)
Propeller Size: 11" x 6" (27.9 x 15.2 cm), 3 blade
Spinner Size: 2" (51 mm)
Speed: 65-70mph (95-110 kph) with 4S power
Power Type: Electric
Motor Size: 3536-850Kv
Technology: Smart, AS3X and SAFE
Approximate Assembly Time: Less than 1 Hour
Flaps: Yes
Under 250g FAA Weight Limit: No
Recommended Battery: 3-4S (2200-3200mAh)
Receiver: Included
Servos: Included
Speed Control: Included
Radio: Sold Separately
Battery: Sold Separately
Charger: Sold Separately
Connector Type: IC3
Minimum Required Radio: 5+ Channel Full Range
Includes:
(1) E-flite RV-7 1.1m Bind-N-Fly with:
(1) Spektrum Avian 45A Brushless Smart Lite ESC (installed)
(1) Brushless Outrunner Motor (installed)
(6) Digital Servos (installed)
(1) Spektrum AR631 6-Channel Receiver (installed)
(1) Product Manual
Needed to Complete:
Full-range 5–6+ channel Spektrum DSMX/DSM2 compatible transmitter
3S 11.1V or 4S 14.8V 2200–3200mAh LiPo with EC3 or IC3 Connector
Compatible LiPo charger