Aimed towards the serious RC rock crawler enthusiast, the Enduro Ecto Trail Truck is packed full of performance features that are sure to impress.

Built on Element RC's proven stamped steel C-channel chassis this truck features the Gatekeeper Suspension package (GKS) with rear trailing arms that move the shocks forward. This allows for a larger window for shock tuning and providing improved weight bias. The trailing arms are paired with a rear anti-roll bar for a more stable and consistent suspension when crawling on the rocks. An adjustable aluminum track bar mount firmly bolted to the chassis rail gives the Enduro Ecto more reliable and responsive steering without the flex. Shock mount inserts offer multiple mounting positions to allow for precise suspension tuning, whether moving the shocks up, down, forward, or back.

Behind-the-axle (BTA) steering link greatly improves approach angle and front-end clearance, making rough terrain much easier to handle. The Stealth X features the ability to adjust the rear drive ratio independently of the front drive across three levels: stock overdrives the front end 5.7% (installed in the Ready to Run), option 1 provides a one-to-one drive ratio front-to-rear (available separately), and option 2 overdrives the front end 11.83% (included with Ready to Run).

Gripping the trail is a set of officially licensed General Grabber X3 tires molded in a high-performance, soft compound rubber. The General Grabber X3 tires are mounted on Ocho beadlock wheels. No more worrying if your Ready to Run tires will come unglued.

The Ecto R/C Rock Crawler Review

Element RC Enduro Ecto RTR

Features:
Stealth X Transmission
Aluminum Track Bar Mount
Shock Mount Inserts
Rear Anti-Roll Bar
Reedy Power 5-slot 14-turn brushed 550 crawler motor
Water Resistant Reedy Power ESC
Trailing Arm Rear Suspension
Behind-the-axle (BTA) steering
Aluminum steering plates
Integrated servo winch mount
Threaded aluminum shock bodies
CMS (Chassis Mounted Servo)
Universal front drive axles
Stamped steel frame rails
Aluminum motor plate
Optimized ball cups for more fluid axle articulation
Telescopic driveshafts front and rear
Extruded aluminum driveshaft splines
One-piece rear axle design
Splined front axle with adjustable caster
Machined input pinion gear
Metal ring gear
Machined steel top shaft
Heavy duty 5mm diameter steel links
Metal ball bearings included
12mm Hex
Adjustable front track bar
Licensed 1.9"x4.65" General Grabber X3 tires
Specifications:
Scale: 1/10
Power Source: Electric
Length: 462mm (18.19in)
Width: 236 (9.29in)
Wheelbase: 325mm (12.8in)

Needed to Complete:
(1) Battery Pack with T-Style Connector
(1) Charger (Compatible with battery)
(4) AA Batteries for Transmitter