Add strenth while reducing weight on your Traxxas Slasy 4x4, Stampede 4x4 or Rally 4x4 with these front or rear A-arms from RPM. RPM tightened the tolerances around the hinge pins, reducing the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90%. As a bonus, RPM cut 6.5 grams of weight off of each A-arm for a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions. RPM A-arms carry over their traditional look with 30 degree leading and trailing edges and huge bosses for the shocks and sway bar mounts. RPM A-arms are molded in their trademark blend of incredibly durable nylons and are backed by an industry leading warranty.
We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.
RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
Features:
Plastic construction that is black in color
Compatible with the 1/10 versions of the Slash 4x4, Stampede 4x4 and Rally 4x4. (Does NOT fit ST versions of the Rally).
Each Arm is 6.5 grams lighter than stock.
One pair of arms included for front or rear of vehicle.
Two packages needed to complete one full vehicle.
Replaces stock Traxxas #3655R and #3655X.