This is the MST RMX 2.5 1/10 2WD Brushless RTR Drift Car. Building off of the success of the RMX 2.0 this updated version brings the next level of performance to the RMX name. With countless hours of research and development, MST has fine tuned the RMX platform for the ultimate drift experience. Designed to be easy to drive for beginners but still rewarding for the experienced drifter, MST has included an updated chassis. This improved chassis offers increased traction and control along with a plethora of adjustments to fine tune your driving experience. Whether you are an experienced drifter or just getting started, the RMX 2.5 RTR gives you the performance you are looking for with looks to match! This RMX 2.5 RTR includes the E30RB pre-painted body.
NOTE:
With MST's commitment to quality they test drive each vehicle to ensure proper operation. In some cases there may be slight marks on the tires and this is considered normal.
Wheels shown in photos may not depict the wheels included with the vehicle. MST includes a random set of wheels.
Features:
Updated chassis adds improved rear traction and control
Two servo install options – vertical or lateral
Updated spur gear allows the gearbox to be converted from RMX to RRX configurations
Adjustable high angle steering system with adjustable Ackermann changes
6 degree KPI steering upright, and -0.5 towing distance axle design
Redesigned inside rod fulcrum mount at the front upper arm features a 10-step height adjustment and two side positions
Updated HT "Short" rear lower arm
The fulcrum at the rear suspension upper rod features a 5-step adjustment on both sides and the outer fulcrum is 4-step adjustable on both sides
Two motor mounting options – High or Low center of gravity
Oil filled high performance shocks
Full ball bearings throughout
Steel CVD axle transmission system
Realistic caliper and disc shape brake set
Battery mount accommodates both standard and "shorty" style battery packs
Hobbywing XBL 2500Kv brushless motor
Hobbywing XBL50 brushless ESC
MST SC-0352 high speed steering servo
MGX Steering Gyro
Realistic drift wheel and tire package
Specifications:
Size: 1/10 Drift Car
Wheelbase: 257mm
Width: 190mm
Hex to Hex Width: F178mm / R171mm
Drive mode: RWD
Caster: Adjustable 6 / 8 / 10 / 12 degree
Bearing: Full ball bearing transmission system
Damper: Hydraulic damper set

Includes:
RMX 2.5 RTR Drift Car
XTR-03 2.4GHz Radio System
XBL 2500Kv Brushless Motor
XBL50 Brushless ESC
MST SC-0352 Servo
Steering Gyro
Realistic Street Tires
Needed To Complete:
(1) 2S LiPo or 6-Cell NiMH Battery Pack w/T-Style Connector
(1) Compatible Battery Charger
(4) "AA" Batteries (for transmitter)